Envoyer le message

650 tonnes/mois Ligne d'anodisation automatique en aluminium de haute qualité

1 jeu
MOQ
RMB8,500,000-10,000,000/set
Prix
650 tonnes/mois Ligne d'anodisation automatique en aluminium de haute qualité
traits Galerie Description de produit Demandez une citation
traits
Caractéristiques
Produits: 650 tonnes/mois
Lieu d'origine: Chine du Guangdong
Avantages: Une plus grande souplesse de production
Épaisseur du film anodisant: 8 à 12 μm
Max Profile Length: Pour les véhicules à moteur
Couleur: Argent bronze brun noir champagne or
Réservoirs à l'intérieur de taille: 8000*width*3500
Voltage: 380 V à 415 V
Mettre en évidence:

ligne d'anodisation automatique en aluminium

,

650 Ton/month Anodizing Line

Informations de base
Lieu d'origine: Chine
Nom de marque: MEI-AL
Numéro de modèle: APL-650T
Conditions de paiement et expédition
Détails d'emballage: emballage à l'exportation
Délai de livraison: 180-200 jours
Conditions de paiement: T/T
Capacité d'approvisionnement: mois 1set/6
Description de produit

650 Ton/month high quality automatic aluminum anodizing line

一. Product description: 

1.Anodizing production line is a common metal surface treatment process, which improves the corrosion resistance, hardness, and wear resistance of metal materials by oxidizing the metal surface in acidic electrolyte, and endows them with a beautiful appearance.   

2.Anodizing is the process of anodizing a metal surface in an acidic electrolyte to form a dense oxide film on the metal surface.

3.Oxide film has high corrosion resistance and hardness, which can effectively protect metal materials from external environmental damage.

三. Design Condition

1 Alloy Aluminum 6061 to 6063 or others
2 Anodizing film thinkness 10~ 12µm micron
3 Average coverage area 350m²/T (ton)
4 Max aluminium profile length 6500mm
5 Extrusion rati 2.5kg/m²
6 Working hour/m 300d/m x 20h/d = 600h/m
7 Racking system Two fixtures /rack
8 Racking operation Mamual
9 Equipment Usage Rate 0.9
10 Power supply AC 3phase 380v 50hz
11 Control Power AC220V 50Hz
12 Water supply 2kg/cm²·G
13 Hot steam 6kg/cm²·G
14 Compressor air 6kg/cm²·G

四.Process Tank

  1. Degreasing 【Free sulfuric acid 180±30 g/l】 1 Tank
  2. Alkaline Etching【Free alkali 40-60g/l,Al3+ 30-120g/】 2 Tanks
  3. NeutralizationFree sulfuric acid180±20g/l】 1 Tank
  4. Anodising 【Free sulfuric acid 140-180g/l,Al3+≤20g/l】 3 Tanks
  5. Colouring 【stannous sulfate 3-8g/l,Free sulfuric acid 15-25g/l,PH 0.8-1.2】 2 Tanks
  6. Medium Temperature Sealing【PH 5-6.5,Nickel ion0.8-1.3g/l,Fluorion0.3-0.7 g/l】 1 Tank

五, Treatment Process:

  1. Degreasing
    (1) 6jig(rack)/ tank x 1 tank
    =6jig(rack)
    (2) treatment time: 2-5min
  2. Alkaline Etching
    (1) 6jig(rack) / tank x 2 tank
    =12jig(rack)
    (2) treatment time: 3-15min
  3. Neutralization
    (1) 6jig(rack) / tank x 1 tank
    =6jig(rack)
    (2) treatment time: 1-5min
  4. Anodizing
    (1) 2jig(rack)/tank x 3tanks = 6jig(rack)
    (2) Current density: 130A/m²
    (3) Process time: 30min
    (4) Unprocess time: 10min
    (5) Total time 30+10=40min

(6) Average anodizing layer : 0.36*1.3*30*0.77 =10.81um

  1. Colour 1

1) Clour process: Mix Salts

2) Quantity: 2 jig(rack)/tank x 1tanks = 2jig(rack)

3) Current density: 70A

4) Process time: 2-8min

 

6. Sealing
1) Sealing menthod: Sealing at Medium or Normal Temperature
2) 
Quantity:6jig(rack)/tank x 1 tank
3) Process time 10-15min

 

六. Design Parameter and Setting

1. Anodizing treatment area:
1) Each anodizing process tank need 40min ,where total jig(rack)/year:

( 2 rack x 3 tank x 60min/h) ÷40min x600 hour =5400jig(rack)

2) Design 50m²/jig(rack) . Where every tank is 100m²
3) 
Area treatment/year : 5400jig(rack)x 50m² /jig =270000m²

 

2. Anodizing treatment weight:
Monthly output : 270000m²÷350m²/T*0.9=694T≧650T

 

3. Power consumption:
1) Anodising Tank:100m²/tank* 130A/ m²÷0.9=14444A/tank

Power Rectifier : 15000A =3unit
2) Clouring tank: 100㎡/tank×70A/m²÷0.9 = 7777A/tank

Colour Rectifier : 8000A =2 unit

 

650 tonnes/mois Ligne d'anodisation automatique en aluminium de haute qualité 0七. Process Chat

Discription for Un

1 De Degreasing 
2 Rs Rinsing
3 HW Rs Hot Water Rinsing 
4 AE Alkaline Etching  
5 Ne Neutralization
6  An Anodizing
7 Cl Coloring 
8 Sl Sealing 
9 MU Material Unloading 
10 Pc Packing 

 

650 tonnes/mois Ligne d'anodisation automatique en aluminium de haute qualité 1

八, Composition and description of the automatic control system

1, This system is applicable to the semi-automatic production line of aluminum oxide anodization. According to its process specifications, the system is planned to adopt an upper computer monitoring and management system (composed of an industrial control computer IPC), a lower computer control execution system (PLC), detection components, and execution devices. There are two operation modes in terms of operation: manual and semi-automatic. When the system is running normally, it is semi-automatic. Based on the input of feeding data, the crane can identify the slot position in semi-automatic mode and execute corresponding oxidation, coloring and other processes. The temperature of the slot liquid meets the process requirements in semi-automatic control. In semi-automatic mode, the single step operation of the crane and related equipment can be controlled in the central control room. In manual mode, the operation can be carried out through on-site operation buttons.
 

2, Semi-automatic given control system
(1) The start and stop of the oxidation power supply can be controlled manually or by the PLC of the automated production line;
(2) PLC setting for oxidation working time timer or automated production line;
(3) The output current or voltage value and operation process of the power supply are set by the production line PLC and the central control system;
(4) The operating parameters and status can be transmitted to the upper PC of the production line through the communication interface;
(5) You can preset the set values according to the process and provided parameters.

 

九, Automatic transfer of material on the production line and transfer of material beams in the workshop

Automatic feeding and unloading lifting device:

Setting: Each feeding position is a single beam for feeding and unloading, and the lifting device is equipped with conveying equipment before and after the lifting device. The empty beam and the solid beam are separated and the six rows are used as a unit to ensure that the six rows of materials are processed in the same process, avoiding the need to allocate processes and occupying driving resources and efficiency.

Technical parameters:

(1) Lifting speed: 8m/min RV brake motor drive

(2) Beam translation speed: 8m/min WB brake motor drive

(3) Rated load: 300+300Kg

(4) Lifting stroke: 3500mm

Chain automatic conveying device in the loading and unloading area:

The loading and unloading areas are set up in total:

Lift section transfer

Technical parameters:

(1) Translation speed: 3.2m/min

(2) Rated load: 5000Kg

(3) Drive power: reduction motor 1.5kw

(4) Effective length of chain: 5400mm/2800mm

Chain automatic conveying device for pre-treatment and material preparation area:

Set up a set of feeding and unloading areas for conveying, and a set of pre oxidation treatment and storage materials for conveying.

Technical parameters:

(1) Translation speed: 3.2m/min

(2) Rated load: 9000Kg

(3) Drive power: reduction motor 1.5kw

(4) Effective length of chain: 5000mm/7500mm/

CNC automatic sorting and conveying device for drip drying area after hole sealing:

Technical parameters:

(1) Translation speed: 3.2m/min

(2) Rated load: 9000Kg

(3) Drive power: reduction motor 2.2kw

(4) Effective length of chain: 5000mm

Automatic sorting and conveying device before drying:

Technical parameters:

(1) Translation speed: 3.2m/min

(2) Rated load: 9000Kg

(3) Drive power: reduction motor 2.2kw

(4) Effective length of chain: 12000mm

Workshop material beam transfer vehicle

Technical parameters:

(1) Rated load capacity 1500 kg

(2) Variable frequency adjustable movement speed of 10-20m/min

(3) Drive power motor

produits recommandés
Prenez contact avec nous
Téléphone : +86-18675161888
Télécopieur : 86-757-8109-8395
Caractères restants(20/3000)