Automatic Anodizing Line Equipment 25000A PLC Control Power Supply

PLC Control Anodizing Power Supply

The EOE-O9B rectifier power supply products are designed with high standards of energy efficiency and environmental friendliness. They are primarily used for various applications such as aluminum alloy extruded profiles for architecture, anodic oxidation of aluminum alloy, hard oxidation, electrolytic capacitors, electrolytic aluminum foil formation, and other specialized DC power supply needs.

Key Features:

• Automatic voltage or current regulation function based on PID controller to correct output errors.
• PLC implementation for digital input of desired output voltage or current.
• Protection features including current limiting, overvoltage protection, phase loss protection, and temperature protection.
• Intelligent operation control screen displaying current settings, parameter adjustments, data display, and fault information.
• PLC enables communication with upper computer, online control, and data collection.
• Soft starting and regulating function for smooth power delivery.
• Intelligent touch screen offers voltage stabilization model, current stabilization model, and area mode operation function.

Usage Criteria:

• Suitable for indoor use under normal conditions.
• Altitude should not exceed 1000 meters (can be adjusted for altitudes above 1000 meters if necessary).
• Operating temperature range: -15°C to +40°C.
• Relative air humidity should be below 85%.
• The installation site should be free from power-insulating gases, steam, chemical deposition, dust, dirt, or explosive etching media.
• Avoid severe vibrations or bumps at the installation site.
• Power supply fluctuation should be within ±10%.