logo
Good price  online

products details

Home > Products >
Anodizing Production Line
>
Semi-Automatic Two-Acid Polishing Anodizing Production Line with 500–800 T/Month Output for Aluminum Profiles

Semi-Automatic Two-Acid Polishing Anodizing Production Line with 500–800 T/Month Output for Aluminum Profiles

Brand Name: MEI-AL
Model Number: MEI-AL-L2026112001
MOQ: I set
Price: Customized Price
Packaging Details: Standard Packaging
Payment Terms: L/C,T/T
Detail Information
Place of Origin:
Foshan, China
Supply Ability:
about 3 months
Highlight:

Semi-Automatic Anodizing Production Line

,

Two-Acid Polishing Anodizing Line

,

500–800 T/Month Anodizing Line

Product Description

A semi-automatic two-acid polishing and anodizing line engineered for mid-size aluminum extruders in Vietnam, Thailand, and Indonesia that require consistent architectural finishes without the capital overhead of full automation. Designed for a monthly output of 500–800 tons, it combines PLC-controlled process reproducibility with the manual racking flexibility needed for mixed batch sizes and multi-color prototyping.

Technical Specifications
Operation Mode Semi-automatic (PLC crane + manual loading/unloading); optional full-automatic upgrade
Monthly Output 500–800 tons (profile-dependent)
Max Profile Length 6,500 mm
Anodizing Film Thickness 8–12 μm (Type II decorative/architectural)
Integrated Processes Two-acid polishing (chemical + electrochemical), anodizing, electrolytic coloring, hot sealing
Tank Inner Size (reference) 8,000 × 1,200 × 3,500 mm (L×W×H), customizable
Rectifier 2,000–3,000 A / 60–80 V DC, ramp control
Tank Material PP / PVC / SS316 as required
Control System PLC + HMI, recipe storage, fault alarm
Power Supply 380 V / 415 V, 3-phase, 50 Hz
Wastewater Treatment Integrated neutralization + membrane filtration (project-specific)
Process Flow
  1. Loading & racking — Manual racking onto jigs; two to three fixtures per rack.
  2. Degreasing — Free sulfuric acid 180 ± 30 g/L; 2–5 min.
  3. Two-acid polishing — Chemical + electrochemical polishing for surface brightness.
  4. Rinsing — Two-stage counterflow rinse.
  5. Anodizing (Type II) — Free sulfuric acid 140–180 g/L, Al³⁺ ≤ 20 g/L; 8–12 μm target.
  6. Rinsing.
  7. Electrolytic coloring — Tin sulfate based electrolyte; silver, bronze, black, champagne.
  8. Hot sealing — Nickel-based medium-temperature sealing; pH 5–6.5.
  9. Drying.
  10. Unloading & inspection — Film thickness check via eddy-current gauge.
Core Advantages
Built around the mid-size extruder’s real constraint: cash flow, not floor space.

The semi-automatic architecture preserves the process reproducibility of a PLC-controlled line while eliminating the capital burden of robotic racking. Two-acid polishing is integrated upfront, so the line delivers bright finishes directly from extrusion—no separate polishing subcontracting required.

PP/PVC tank construction with localized spare-part supply.

Tanks and piping are fabricated from chemical-resistant PP and PVC, with SS316 and titanium available for high-chloride environments. Consumable anodes and filter elements are standardized for regional sourcing, reducing dependence on long-lead imported components.

Recipe-driven color switching without line stoppage.

The PLC stores multiple coloring bath recipes, enabling silver, bronze, and black production runs on the same line with minimal changeover time—critical for factories serving mixed architectural and solar-frame order books.

Ancillary Equipment (Included / Optional)
  • Low-temperature chiller (for optional hard anodizing module)
  • Acid fume scrubber
  • Demineralized water plant
  • Rectifier with ramp control and digital cycle programming
  • Sludge dewatering / filter press
Frequently Asked Questions
Q: Can this line run hard anodizing later?

Yes. The anodizing tank and rectifier can be upgraded with a dedicated chiller and high-voltage rectifier module. Hard anodizing requires separate tanks and cannot share electrolyte with Type II sulfuric acid—the modular design accommodates this without rebuilding the entire line.

Q: What profile alloys are supported?

6061 and 6063 are standard. 6005A and 6082 are processable with adjusted etching and anodizing parameters.

Q: How long is installation and commissioning?

Typical delivery is 150–180 days; on-site installation and commissioning take 30–45 days depending on line length and local utilities readiness.

Q: Is electrolytic coloring available for solar frame profiles?

Yes. Tin-salt electrolytic coloring produces bronze and black finishes suitable for solar mounting structures, with UV stability substantially higher than organic coatings.